Zimmer MedizinSystems Aesthetic Division
Cryo Mini Filter Changing Instructions

Cryo by Zimmer MedizinSystems – Providing reliable chillers for over 25 years.

This page provides a walk through of the steps to changing your Cryo Mini filter. 

Cryo Mini Filter Replacement Instructional Video: https://youtu.be/bleT7v2GGew

(Please be sure to use the arrows or scroll bars in the viewer above to see each of the pages!)

How to replace your Cryo Mini Filter

  1. Unplug the power cord from the power source
  2. Remove the two rear wheel covers in the back of the unit (With two fingers, grab underneath the wheel. Push down with your thumbs and pull toward you.)
  3. Remove the 4 screws of the large metal plate on the back of the unit (2 screws all the way to the left and 2 screws all the way to the right. Note: Do not remove the four screws that are arranged in a small square as they hold the fan cover in place.)
  4. Pull metal plate away and hold in place
  5. Lift the filter up.  Remove filter
  6. Disconnect the ground wire from the filter
  7. Attach the ground wire to the new filter and slide the new filter in place
  8. Reinsert the metal plate from the top and reattach all 4 screws
  9. Slide the 2 rear wheel covers back into place
  10. Plug power cord back into power source

How To Change Your Cryo Mini Filter